|
Durobond water based paints are low VOC's apart from Super-Prime and Super-Seal and all are formulated to Tropical Strength Anti-Mould level for resistance against mildew, algae’s and lichens. All products are superior quality, tested and proven for their particular function.
Aquapave®
Hard
wearing coating for concrete floors and driveways as a sealer
for cement dust prevention. Resistant to pedestrian and vehicular
traffic. Available in clear or coloured finish.
Blockseal
Waterproofing clear sealer for “Besser” blocks
and other porous materials. Dries to a low sheen, retaining
the natural appearance of the surface. Renders capillaries
hydrophobic to aid in water exclusion. Permanently
waterproofs.
Ultra-Seal
Interior and exterior sealer based on water
miscible polyurethanes for a multitude of uses where an abrasive-and-chemical
resistant coating is specified. Highly resistant to traffic
and staining; good chemical, petrol and oil resistance. Use
on terra cotta tiles, slate, timber and many other surfaces.
Comes in Gloss or Satin Finish.
May be re-applied when eventually required. Catalyst supplied
for enhanced properties.
Slip-Resistant finishes also available. Please
enquire.
Graffiti
Repellent & Anti Graffiti Sealers
DUROBOND Graffiti Repellent (water based)
is applied to porous surfaces to prevent adhesion of graffiti,
and to assist in its easy removal. It is sacrificial, and
requires being touched up after each graffiti removal.
DUROBOND Anti-Graffiti Sealer, also water
based, is used on coated or porous surfaces to form a multi-use
film resistant to graffiti and graffiti remover. Designed
to withstand a number of graffiti removals; may be touched
up when required. Available in gloss finish for the sign
industry and low sheen for other applications.
DUROBOND Graffiti Remover. See Graffiti
Coatings brochure for further information.
Episeal
High solids water based 2-Pack Epoxy Sealer comes as clear
or colour coat for waterproofing and heavy-duty protection.
Excellent water, chemical and traffic resistance. Available
as an anti-corrosive finish. Refer to Episeal Brochure for
more information about this outstanding product.
Flexi-Cover®
Self cross-linking flexible acrylic exclusive to Durobond. Use inside or out for surfaces where its tough, flexible and washable film is required eg: Flexible substrates, highly humid areas, surfaces that are washed frequently etc. Also available in a clear gloss or clear satin finish.
Lumilite® – Luminous Super Glow
Specially formulated and designed for safety purposes. Use in industrial, commercial and domestic areas where illumination is needed in the absence of continual electrical supply. Once charged the product will glow
and show the way for up to 12 hours without lights.
Use it anywhere, anytime as a safety point
for evacuation purposes. Colours available: Yellow-Green / Aqua-Blue / Sky-Blue. For details please click here.
Many other water-based products are manufactured by
Durobond Paints for commercial and industrial applications.
If you have a specific coating requirement or problem, call
or email DUROBOND for the answer.
|
