|
Industrial
Coatings
Durobond
Paints manufacture an extensive range of air dry and baking
enamels for many industrial applications.
All
products made to order and colour specification.
421
Machinery Enamel
Durobond multi-purpose enamel that dries to touch in about
an hour, curing to a film with excellent anti-corrosive, petrol
and oil resistance, tough, and heat resisting to 200ºC.
Used for machinery and general industrial component painting,
including automotive re-spray. Exterior durability is excellent.
Application is by spray, (air & airless) electrostatic,
brush and roller.
431
Quick Dry Enamel
Used for line marking and available in Safety Yellow, Disabled Blue and White. Low cost, general-purpose industrial enamel for use where
exterior exposure is a lesser factor. Touch dry within 20
minutes. Good petrol and oil resistance. generally sprayed,
available in a range of colours, and custom tinted.
461 Rapid Dry Enamel
Touch dry in approx. 15 minutes. Ideal for use by component
manufacturers needing an easy to use enamel that dries very
quickly. Considerably lower in cost than powder coating. Lends
itself to short run applications. Finishing can be completed
at the point of manufacture. Used as a touch up enamel. Exterior
durability is very good.
428
Rapid Dry Hammertone
Very fast drying hammertone. Attractive hammered finish used
extensively on machinery, electronic equipment, office furniture
etc.
Chemical
Resistant Coatings
Epoxy 21 (Two-Pack)
Two-Pack coating for protection against harsh chemicals and
mechanical attack. Used for chemical storage areas, mechanical
workshops, restaurant kitchens, wet areas etc. Provides excellent
adhesion to a wide variety of substrates such as P.V.C. and
many other rigid plastics, laminates, metals and pre-coated
surfaces. Durobond Epoxy Systems employ “user friendly”
solvents of very low toxicity and odour.
Epoxy 44 (Two-Pack)
A 100% Solvent Free Self-Levelling Clear Epoxy with very low odour, exellent adhesion, chemical and solvent resistance, good strength and toughness and low shrinkage on curing.
Duro-thane
-Two Pack Polyurethane
High-performance, interior and exterior coating
with excellent resistance to weathering, salt and soft water,
soaps, detergents, solvents and oils. Uses include kitchens,
metal coatings, automotive, exterior/interior machinery coating
requiring weather and chemical resistance.
Episeal
(Two-Pack)
High solids water based 2-Pack Epoxy Sealer coat for waterproofing and heavy-duty protection.
Excellent water, chemical and traffic resistance. Available
as an anti-corrosive finish. Refer to Episeal Brochure for
more information about this outstanding product.
Other products available under the Episeal range are:
Epiprime and Epitank (Potable)
|
